Let's Make Space For Nature
Guide To Maintain & Keep Your Tools Clean & Evernew

Guide To Maintain & Keep Your Tools Clean & Evernew

A normal support routine keeps your digging tools good to go and causes them last more. Devices should be sharp, yet in addition perfect and sterile. Devices that are presented to plants or soil with bacterial, parasitic or bug pervasions can spread those issues all through the nursery. 

So, Let's Start!!

Make sure you clean your gardening tools to stop the plants from catching diseases. Cleaning your rusty, old garden equipment will help in stopping the infections from spreading through the garden from one unhealthy plant to another. It even assists in keeping them free from rust, because clean tools have a tendency of getting exposed to less moisture.

It might seem fussy, however wiping your pruning shears with a good household cleaner before and after cutting the plant matter can help in stopping the infections from spreading. It’s very crucial to wash your gardening tools if they have been in touch with concrete because it will dull the sting of blades and spades if it's left to harden.

Cleaning Gardening Equipments & Tools:

1. Clean your gardening tools to keep them sharp. Maintaining gardening tools sharp makes them more safe and easier to use. A sharper blade is generally considered safer as it needs less force to slide.

Moreover, when you cut through the cells on your tree/plant with something like a pair of secateurs, a pointy blade would result in less cell damage and will not crush as many cells as compared to a blunt blade. This even helps your plant in healing faster, which further diminishes the hazard of causing infection setting in from the weather or the fungi.

2. Clean any kind of debris or dirt from your tools, especially from the blade area. Using water and a stiff brush will do fine for the same.

3. Do not postponement if you have been using the tool for any kind of drying or setting agents for instance sealant, cement or paint. In case your tools have any drying or setting agents on them then they must be cleaned quickly before they get dried.

4. You may use a comb to remove the dirt, post which you can rinse the tools in the running water and leave them to dry. This would not take more than an overnight if the tools have intricate exteriors that retain moisture.

5. Later you can wipe a light-weight coating of gasoline or mineral over your gardening tools.

6. Check your gardening tools for any kind of damage. As you are cleaning, it is a good practice to inspect the tools for any sort of damage. Usually, you must try to evade using any damaged tools because often they are unsafe.

Wood handles

Don’t forget to take care of the wood handles as well. Minor cracks can be reinforced with heavy duty tape, such as hockey-stick tape. Any severely cracked handles should be replaced immediately to prevent an injury if it should break while being used.

  • After each use, wipe down the handles with a damp cloth.
  • Check for cracks or weakening at seams between the handle and the tool head and address any issues.
  • Seasonally, or as needed, lightly sand and apply boiled linseed oil to condition the handles.


Write a comment

Please note, comments must be approved before they are published

Comment are moderated